Lippert Motorized Hydraulic Leveling System Controls Work The Wrong Jacks On a 2007 Daymon Daybreak

Published 08/28/2021

Question:

Hi, I have a four point leveling system on my 07 Damon daybreak motorhome, the jacks will not auto level it tries to but then stops, they will work in manual mode but all the jacks are backwards, if I push the front button the rear lifts and vice versa and left and right are backwards as well. What could be the issue? Control panel was replaced but didn’t fix the problem, even tried a different control module but same results.

asked by: Jake S

Expert Reply:

It sounds like the wiring was changed going into the solenoids at the hydraulic pump on your 2007 Damon Daybreak. I would check these connectors as it sounds like they were mixed up if the unit was swapped out. This would explain why your jack positions are all off and why the auto level fails when you try to use it. The system sends power to one jack and when a different jack lifts the camper the internal sensors read an error.

expert reply by: Bud M