How to Grease Hubs With a Bearing Buddy Installed.
Updated 06/10/2021 | Published 06/08/2021 >
Question:
When installing new bearings, should the hub be completely filled with grease so it will get pushed into the inner bearing?
asked by: Art K
Expert Reply:
When repacking your bearings, you do not want to have the whole hub filled with grease. You basically just want to get the inner and outer bearings and their races greased up and moving smoothly. I attached a video of the process that should help you out as well.
If you are using a Bearing Buddy, like the # BB2441, there is actually an automatic pressure-relief feature built into the Bearing Buddy. When it is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.44 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement DB35 Disc Brake Assembly
- Q&A: What Inner and Outer Bearings Does 3,500 lb Axle Disc Brake Kit Use
- Q&A: Option For Replacing Tie Down 46304 Cailpers
- Q&A: SmartPlug RV TV/Internet Inlet Dimensions
- Q&A: Bearing Buddies Needed for Al-KO 7200 lb Hubs
- Q&A: Replacement Brake Calipers for Dexter 10" Brakes
- Q&A: Difference Between Furrion Chill Cube FR24TQ, FR59TQ and FR67TQ
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 5 Products You Need For Your Next Camping Trip (2022)
- Article: What are the Common Types of Propane Fittings Used on RVs?


