Trailer Coupler for 3 inch Wide Channel that Has 3 inch Mounting Hole Dimension
Updated 06/01/2021 | Published 05/29/2021
Question:
I currently have a Atwood 85778 hydraulic surge brake actuator, I want to replace it with a straight tongue coupler. Boat is light so I really dont need the brakes and all the hastles that come with it. Currently its on a 3 inch channel and the bolt holes are on 3inch centers. I only want to do this once so I want to get a good one. What do you recommend?
asked by: Gary P
Expert Reply:
The Fulton Coupler part # F346000301 that you referenced is a high quality coupler and also covers everything you need as it fits the 3 inch wide channel and has mounting holes that are 3 inches apart on center.
Product Page this Question was Asked From
Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 6000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- Fulton
more information >
Continue Researching
- Q&A: Replacement Trailer Coupler Solution for Atwood 61101 on Trailer
- Q&A: Outside Dimensions of Gen-Y Weld-On 2" Receiver Tube
- Article: Trailer Lighting Requirements
- Q&A: What is the Maximum Tounge Weight Capacity of the Fulton Fast-Lok Coupler - 6,000 lbs
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How Does a Trailer Hitch Coupler Work?
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Q&A: How Much PSI Should I Put In a 4.80 x 12 Trailer Tire
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide