Recommended A-Frame Trailer Jack To Replace Damaged Pro Series PS1400600303

Updated 04/14/2021 | Published 04/13/2021

Products Featured in This Question

Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs

(826)

$49.50

Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs

(509)

$64.20

Question:

my car trailer came with a Pro Series 5k lb bolt on manual tongue jack model #1400600303 and the top beating in the jack has disintegrated. I would like to replace the bearing or the entire jack since it not expensive to do so - and upgrade to a bulldog unit. my questions is do all A frame bolt on jacks share the same hole pattern so I could bolt a new one to the existing threaded locations? if not do you have the bearing for this unit I could buy in order to rebuild it?

asked by: Michael K

Helpful Expert Reply:

I reached out to Pro Series and unfortunately there is no replacement parts available for the Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs # PS1400600303 you have so your only option will be to replace the jack.

A frame jacks like the Pro Series # PS1400600303 you have use a standard 3 bolt pattern so you would not have any issues replacing it with a Bulldog jack like the Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbs # BD155032.

I included a video of the # BD155032 for you to take a look at.

expert reply by: Samuel C