How To Fix Power Wire On Voyager WiSight Backup Camera That Was Cut
Updated 03/09/2021 | Published 03/01/2021 >
Question:
Someone cut the cable to my winegard voyager WiSight backup camera. Can you tell me how to splice it back together? Thank you
asked by: Duane S
0
Expert Reply:
Thanks for the picture!
Based on the picture you sent in you may have enough room to use heat shrink butt connectors # DW05743-5 to reconnect the cut wires. There should be one black wire, and one red wire. You will need to strip back the jacket on the wires, reconnect them using the # DW05743-5, and then can use black electric tape # PP47FR to cover the connections to make it blend in.
expert reply by:
Samuel C
0
Product Page this Question was Asked From
Deka Heat Shrink Butt Connector - 22-18 Gauge - Nylon Insulation - Red - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 18 Gauge
- 20 Gauge
- 22 Gauge
- Deka
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended 7-Way Connector for a 2024 Subaru Crosstrek
- Q&A: Do the Hitches for a 2024 Subaru Crosstrek Fit the Wilderness Model?
- Q&A: Comparing Curt And EcoHitch Trailer Hitches For A 2023 Subaru Solterra
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: 2015 Winnebago Brave Brake Controller and Install Port Location
- Q&A: Blue Ox Base Plate Installation Video on a 2023 Ford Ranger
- Article: Trailer Lighting Requirements
- Q&A: How Much of Each Gauge of Wire Fit Inside a Wire Loom Comfortably
- Q&A: Recommended Trailer Wiring Harness for a Boat Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Change a Trailer Tire
- Article: Is It Illegal to Leave My Hitch on My Truck?



