Bergman Trailer Tail Lights in LED?

Question

Question:

Hi - I am looking for this tail light in LED - is it available? Bargman Trailer Tail Light - 4 Function - Incandescent - Rectangle - White Base - Red Lens Item # 30-92-001

asked by: Michelle

0

Expert Reply:

That specific tail light is not available in LED but the Command Electronics # 328-003-81LM1 with 22 bright diodes is the sleek and modern replacement for it. This model is for the drivers side and has an attached license plate bracket and light. For the passenger side use # 328-003-81M1. Both lens measure 8-11/16" X 3-7/8", and are about 2" thick and have bright LED's for better visibility.

expert reply by: Les D

0

Answer 1

From the measurements that you gave me the LED Trailer Tail Light with License Plate Bracket #328-003-81LBM1 is exactly what you are needing to upgrade to an LED light. It measures 8-11/16" long x 5-1/2" tall (including license plate…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 5

The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…

view full answer...

Answer 6

Dexter brake assemblies like the part #23-458-459 are essentially the best ones on the market. They use the best materials and and incredibly reliable and well-made. That being said the etrailer.com brand assemblies part #AKEBRK-7-SA are also very…

view full answer...

Answer 7

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 8

I sure do Ronnie and welcome back! The Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459 are exactly what you need. These self adjusting set of brake assemblies will replace the 12" ones currently on your Airstream trailer. They have…

view full answer...

Answer 9

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

view full answer...

Answer 10

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Bergman Trailer Tail Lights in LED?

Continue Researching