Mounting Hole Spacing on Erickson Horseshoe Rope Cleats, Part # EM09090

Updated 01/29/2013 | Published 01/25/2013

Products Featured in This Question

Erickson Horseshoe Rope Cleats (2 Pack)

(45)

$19.49

Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs

(391)

$25.69

Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs

(682)

$8.38

Question:

I contacted your ware house about the horseshoe cleats you have advertised. she informed me that the meassurement straight across the bottom holes were 2inch center to center. But your web page says 2 5/16inch center to center. ineed one 2 5/16 center to center. if you have one that matches what i am looking for i would love to buy several of them. the old one that i need to match up to is the same distance from hole to hole all the way around. i thank you very much and look forward to hearing from you

asked by: Brendon M

Expert Reply:

The Erickson Horseshoe Rope Cleats (2-Pack), part # EM09090, have three mounting holes in each and include Phillips-head mounting screws.

I pulled a sample from our warehouse to take precise measurements of the mounting holes.

Please refer to the attached photo. The two mounting holes on the bottom of the horseshoe are spaced 1-7/8 inches apart, measured center of hole to center of hole. The distance between either of these bottom holes and the middle/top hole is 2-3/16 inches.

My contact at Erickson confirms this is the only product of its type that they offer. We do have boating-type cleats but nothing similar to this item with the specific mounting hole spacing you require. I have included links to two other tie-down products in case these might work for you. These are the Brophy Trailer D-Ring Bolt-On Tie Down, part # SR15-C; and the Recessed Trailer D-Ring Tie Down, part # RR5K.