Wiring Adapter for Installing a Prodigy Brake Controller, Part # 90185 on a 2000 Toyota Sienna
Updated 08/12/2009 | Published 08/08/2009
Products Featured in This Question
Question:
I WISH TO INSTALL YOUR PRODIGY BRAKE CONTROLLER ON MY 2000 SIENNA VAN. DO YOU HAVE OR SELL A WIRING ADAPTER FOR THIS APPLICATION? IF NOT, CAN YOU GIVE ME THE PROPER WIRING APPLICATIONS SO I CAN DO IT MYSELF. I AM CAPABLE OF DOING THE WIRING MYSELF WITH YOUR WIRING APPLICATION AVAILABLE TO ME.
asked by: FRED L
Expert Reply:
Some vehicles have the provision for plugging the brake controller directly into the wiring under the dash, but unfortunately that option is not available with your 2000 Toyota Sienna. Your Brake Controller will have to be hardwired directly into the existing vehicle wiring. We have a Brake Controller Installation Guide available on our web site. As the Guide mentions, in addition to a brake controller, you will also need the appropriate installation kit (Part # ETBC7 for a 7-Way Connector or ETBC6 for a 6-Way Connector)and a trailer wiring harness part # 43475 to tap into your vehicle taillight wiring. We also have a Brake Controller FAQ page which shows a typical brake controller wiring diagram.
