Flat Tow Set Up For A 2013 Ford F-250
Updated 01/12/2021 | Published 01/09/2021 >
Products Featured in This Question
Question:
Hi, Just bought a motor home. want to get a setup to flat tow a 2013 F250 Crew cab super duty. I will need the entire setup. Can you make recommendations? Thanks
asked by: Gordon H
Expert Reply:
To get your 2013 Ford F-250 set up to be flat towed I recommend the following items:
The Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # 4428-3. The base plate replaces your factory tow hooks and connects to the frame of the truck to provide a solid connection point for the tow bar.
Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K Item # RM-676. This tow bar comes with the safety cables and umbilical cord integrated into it so you don't have to worry about buying them separate. Each arm has an integrated LED light so the tow bar can be seen at night.
Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154. This kit is designed to allow your light functions on the motor home to be transferred to the factory taillights on the truck so your legal and safe. The diodes protect the factory wiring from back feed if there is an issue between the two vehicles.
I also recommend adding RoadMaster 6-Wire Trailer Connector - Vehicle End Item # RM-910030-7 because the umbilical cord is a 7pole and 6 pole. This connector mounts to the front of the truck to provide a connection point for your umbilical cord.
The Blue Ox Patriot Portable Braking System - Proportional Item # BLU37TR. This braking system is easy to set up and use. The system sits in the floor board of the truck and applies the brake in proportion to the braking pressure in the RV. The System can also be used with multiple vehicles so if later on you decided to set up a different vehicle to be flat towed this system can be used in both vehicles.
I also recommend the Roadmaster Battery Charge Line Kit for Towed Vehicles Item # RM-156-25. Although this is not a required part I recommend it because the braking system requires a 12 volt plug to operate. Every time the brakes are applied the braking system draws power from the vehicles battery. This kit allows your vehicle battery to be charged while you are traveling so it's ready when you get to your destination.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate - Non-Binding - LEDs - RV Mount - 8K
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Roadmaster InvisiBrake Flat Tow Brake System - Preset
- Video: Mount: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit on a 2013 Jeep Wrangler Unlimited
- Shop: Blue Ox Alpha Non-Binding Tow Bar - RV Mount - 2" Hitch - 8,500 lbs
- Video: Best 2013 Jeep Wrangler Unlimited Flat Tow Set Up - Tow Bar Braking System
- Shop: Trailer Wiring
- Search Results: wiring harness
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Shop: Base Plate for Tow Bar
- Video: Checking Out the Roadmaster InvisiBrake Flat Tow Brake System
- Video: All About the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Video: How to Install the Roadmaster InvisiBrake Flat Tow Brake System on a 2017 Jeep Wrangler Unlimited
- Shop: Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Shop: Roadmaster BrakeMaster w/ Pressure Reducer for RVs w Air or Air-Over-Hydraulic Brakes - Proportional
- Video: Roadmaster Nighthawk All Terrain Tow Bar Installation - 2021 Jeep Wrangler Unlimited RM-677
- Video: Feature Breakdown: Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate
- Shop: Cold Air Intake
- Shop: Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter
- Q&A: Disc Brake Conversion Kit For 2021 Grand Design Solitude 310GKR With 7,000 lb Axles
- Q&A: Correct Tow Bar Wiring For 2022 Jeep Gladiator With LED Lights & ParkSense
- Q&A: Pin Comes Out Of Shank On BlackHawk 2 Tow Bar While In Stored Position
- Q&A: Recommended Spacing for Mounting Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs
- Q&A: Dimensions and Hole Spacing for Roadmaster MS Base Plate Kit - Fixed Arms Item # 1437-3
- Q&A: Installation Instructions for Roadmaster Direct-Connect Base Plate Kit # RM-524441-5
- Q&A: Recommended Replacement Actuator For Fulton A50 On 2007 EZ Loader Trailer
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)




