Determining Hanger Positions With The Dexter Tandem Axle Trailer Hanger Kit # HAP-103-203-03

Updated 12/18/2020 | Published 12/15/2020

Question:

Cual piese es la que va al frente del trailer .Deberian de poner un video de como se ensamblan para ver las posiciones de las partes al soldar Gracias Which one is the one that goes to the front of the trailer. They should put a video of how they are assembled to see the positions of the parts when welding Thanks

asked by: Alex

Expert Reply:

Para instalar primero el kit de suspensión de remolque de eje tándem de Dexter # HAP-103-203-03, tome algunas medidas. La distancia entre la percha delantera y central debe ser de 38-1 / 3 pulgadas (Medida A) y la distancia entre la percha central y la trasera debe ser 37-7 / 10 pulgadas (Medida C). El soporte más alto irá hacia atrás. La percha al final de la medida A será la percha delantera. ¡He incluido un diagrama para ayudar a ilustrar!

To install the Dexter Tandem-Axle Trailer Hanger Kit # HAP-103-203-03 first, take some measurements. The distance between the front and the center hanger should be 38-1/3 inches (Measurement A) and the distance between the center and the rear hanger should be 37-7/10 inches (Measurement C). The taller bracket will go to the back. The hanger at the end of measurement A is going to be the front hanger. I've included a diagram to help illustrate!

expert reply by: Adam E