Color Options For Valterra 5 1/4" Diameter RV Vent Ceiling Register

Question

Question:

Does this item come in light brown? Valterra RV Vent Ceiling Register - 5-1/4 Diameter - Off White - A10-3349VP

asked by: Audie R

0

Expert Reply:

There are a few other colors than the off white that the Valterra RV Vent Ceiling Register - 5-1/4" Diameter # A10-3349VP is offered in that may interest you.

The closest color to a light brown would be the Beige # A10-3351VP but we also offer Brown # A10-3352VP, Black # A10-3353VP, and standard White # A10-3350VP.

I included a video of the Valterra RV Vent Ceiling Registers for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The part of the Valterra Adjustable A/C Ceiling Register #A10-3359VP that would fit into a hole is 5-13/16 inches in diameter. The hole you have would have to be widened for this register to fit.

view full answer...

Answer 2

The Valterra RV Vent Ceiling Register #A10-3359VP that you mention, actually has a 5-3/4" opening. The 5" listed is referring to the grille opening, whereas the actual mounting dimension is 5-1/8". If you're needing a ceiling…

view full answer...

Answer 3

Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…

view full answer...

Answer 4

Hey Danny, what you would want is the ShakeStopper Heavy Duty 2 inch hitch part #MNT72VR which has a 400 lb tongue weight capacity and was designed with heavier bike racks in mind. The hitch you mentioned only has a 100 lb capacity so it would not be…

view full answer...

Answer 5

Lippert is deeply in the pockets of pretty much every trailer/motorhome manufacturer so they most likely installed the repeater block so that you'd be more inclined to purchase their sensors over other brands. The Tire Linc OneControl TPMS w/…

view full answer...

Answer 6

The rebound clip is a pretty important piece on the leaf spring stack so I wouldn't really say it is okay to use your trailer without them. The rebound clips are designed to hold the leaf spring stack together so that when you hit a bump in the…

view full answer...

Answer 7

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 8

Your 2015 Freightliner Mercedes Sprinter 3500 with the 144 inch wheelbase and factory step bumper is indeed compatible with the Curt Trailer Hitch Receiver #13375. The brackets and step frame do fit together, as you'll remove the factory…

view full answer...

Answer 9

The top of the line cover we have for your 2023 Grand Design Momentum 320G is the Adco SFS AquaShed RV Cover for 5th Wheel Toy Haulers item #290-52256. This cover will stand up well against wind, rain, and snowy climates. The Adco Cover item…

view full answer...

Answer 10

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Answer 11

Our tire and wheel assemblies do not come from the manufacturer balanced. This being as it is not as important to have trailer wheels balanced like it is for vehicle tires. Trailer tires main purpose is supporting heavy loads and not providing a…

view full answer...

Answer 12

Yes, we do have lug nuts and center caps that will work with the wheel included with tire and wheel combo #AM32684. The recommend lug nuts are either #12CLN or #12CLN-L. They are sold in quantities of 1. Lug nut #12CLN-L will be the easier one to get…

view full answer...

Color Options For Valterra 5 1/4" Diameter RV Vent Ceiling Register

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching