What Parameters Can Be Monitored with the Edge Insight CTS3 On a 2020 GMC Sierra 3500 with 6.6L

Updated 09/11/2020 | Published 09/09/2020

Question:

What pids or parameters can it display on a 2020 GMC 3500 ? Thanks

asked by: Scott B

Expert Reply:

In regards to the Edge Insight CTS3 Comprehensive Gauge Display part # EP54FR which is a fit for a 2020 GMC Sierra 3500, the following can be monitored for models with the 6.6L Duramax Engine:

Accel Pedal Position, Ambient Air Temp, Barometric Pressure, Battery Voltage, Corrected Speed, Desired FRP, Desired Idle RPM, Distance Code Cleared, Distance Since Regen, EGT Exhaust Manifold, EGT1 Post Turbo, EGT2 Post CCDOC/Pre SCR, EGT3 Post SCR/Pre DPFDOC, EGT4 Post DPFDOC/Pre DPF, EGT5 Post DPF, Engine Coolant Temp, Engine Load, Engine RPM, Engine Run Time, Fuel Pressure, Fuel Rail Pressure, Fuel Temperature, G Force, Gear & TCL, Horse Power, Intake Air Temp Manifold, Main Injection Timing, Manifold Abs Pressure, Mass Air Flow, Mileage Average, Mileage Coach, Mileage Instant, Percent Grade, Regen Status, Regeneration Reason, Run Time, Start Up Intake Air Temp, Time 0 to 60, Time Quarter Mile, Torque, Trans Fluid Temp, Trip Odometer, Turbo Boost, Turbo Vane Position, Soot Accumulation percent, Urea Fluid Temp, Urea Pressure, Vehicle Sped, Warm Ups W/out Emissions Malfunction, Warm Ups W/out Non Emission Malfunction

expert reply by: Conner L