Recommended Trailer Hitch Receiver for 1998 Honda Accord

Question

Question:

Looking for hitches that would work for my vehicle. 98 Honda Accord

asked by: Tre

0

Expert Reply:

The trailer hitch receiver I recommend for your 1998 Honda Accord is the Curt # C11290. This is a class I hitch with a 200 pound tongue weight and 2000 pound towing rate. You can use it to carry cargo or up to 2 bicycles.

expert reply by: Kyle S

0

Answer 1

The furthest two attachment points for the cross tubing on Curt Hitch, #C11290, are in the trunk pan (where the spare tire sits) and not the frame. The attachment point for the bracket nearest the receiver opening is a tow hook near the center of the…

view full answer...

Answer 2

To install the Curt hitch part #C11327 on a dual exhaust version of the 2006 Honda Accord Sedan really wouldn't be that much different than a single exhaust. We had a customer come back and write a review for this hitch and he mentioned that he…

view full answer...

Answer 3

I checked with Curt and the hitch tube of the hitch #C11327 that you referenced measures 6.4 inches.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Recommended Trailer Hitch Receiver for 1998 Honda Accord

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching