Can Dexter Trailer Hub # 008-399-92 Fit Hub Centric Wheels
Published 05/08/2020
Question:
Lug nuts the hub pilot is 4.77 one of my concerns is the depth of the hub if the surface are can hold the thickness of the Kodak brake rotor and still support the hub centric wheel ?
asked by: Chad L
0
Expert Reply:
What's the pilot diameter of your wheel and does it normally attach with lug bolts or lug nuts?
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Hub - Grease - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Is The Tread Size For The # 42 Spindle?
- Q&A: Troubleshooting No Power To Trailer Brakes When Trailer Connected To New GM Truck
- Q&A: Disc Brakes for Sundowner Toy Hauler With Lippert Drum 2420801
- Q&A: Cross Referencing a Dexter Hub with 70-7 Stamped On It
- Q&A: Replacement Spindle Nut and Tang Washer for Dexter 10k Axle
- Q&A: How To Convert Dexter Electric Drum Brakes to Hydraulic Disc Brakes on 10K Axle
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Change a Trailer Tire
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Titan Hydraulic Trailer Parts
Chad L.
5/8/2020
Lug nuts the hub pilot is 4.77 one of my concerns is the depth of the hub if the surface are can hold the thickness of the Kodak brake rotor and still support the hub centric wheel ?