Recommended Tire to Fender and Tire Sidewall to Trailer Frame Clearance
Updated 04/24/2020 | Published 04/23/2020
Question:
How much clearance should we have between a tire and the deck of a trailer ? Trailer will have a 3500 lb tandem axle setup with double eye leaf springs . Thanks
asked by: Ron
Expert Reply:
The minimum distance between side wall of the tire and and trailer frame depends on the trailer, you definitely don't want the tire and the trailer to touch so 2" of clearance is a safe distance however you may be able to get away with less as long as they do not touch.
The recommended clearance between the top of the tire and the fender is 3-4 inches when the suspension is fully compressed to accommodate for suspension travel.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Continue Researching
- Q&A: Recommended Clearance Between Tire and Trailer Frame Rail
- Q&A: What Direction Should The Band on a Leaf Springs Be Faceing
- Q&A: Hubs To Replace Damaged Hubs With Obsolete LM48548 and L44649 Bearing Combination
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Q&A: Specs for the EMCO 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long EM26AJ
- Q&A: Replacement Inner Member for a Dexter Model A60/A75/XR84 Brake Actuator
- Q&A: Replacement Suspension Components for Anvil 8.5 ft by 20 ft Trailer
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch