Does Bumper Need to be Cut to Install Curt Trailer Hitch on 2017 BMW 4-Series

Updated 07/23/2020 | Published 03/07/2020

Question:

In a 2017 430i convertible M Sport, do I have to cut the bumper? As I saw in some models it does require cutting a piece of the bumper.

asked by: Rodrigo M

Expert Reply:

The time it looks like the fascia would need to be cut is for a 2016 2-series. Since you have a 4-series you should be just fine installing the Curt Trailer Hitch Receiver # C11367 without having to cut into your fascia. Attached is a sample installation video for you on a 4-series.

If you let me know what you plan on using the trailer hitch for I can make some recommendations for you.

expert reply by: Jon G

Bob K.

7/19/2020

I have a 2016 428i convertible X Drive. Will I have to cut a notch out of the bumper to fit the C11367 hitch receiver? The last hitch receiver we bought from you was for a 1999 Saab and it fit perfectly without any cuts...

Chris R.

7/23/2020

On your BMW 428i Convertible you will need to temporarily remove the bumper fascia and heat shield while installing the Curt # C11367, but you won't actually need to trim/cut anything to allow clearance for the receiver once it's in place.