Can Flames Be Operated on Furrion 34 Electric Fireplace without Heat

Question

Question:

Can it be operated with or without heat

asked by: Doug

0

Expert Reply:

Yes, the flame effects for the Furrion Electric RV Fireplace with Crystals - 34" Wide - Recessed Mount - Black
Item # FR88FR can be operated separate from the heating function of the unit. You can simply have the flames activated on the unit without it actually emitting any heat (the heater is controlled with a different button).

I have attached a short video review below that you can also check out.

expert reply by: Chris R

0

Answer 1

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 2

The smoke cover let's in more light than the solid white since the smoke is a translucent color designed to allow light to pass through. So for that you'd want the part #MA00-07000K and you'd be set.

view full answer...

Answer 3

This has come up in the past, and we've actually spoken to their techs in regards to this issue and your Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote #FV807350 will sense the resistance from the MaxxAir FanMate RV and Trailer Roof Vent Cover…

view full answer...

Answer 4

If you are asking about how much living area it will effectively warm that will depend on the trailer and personal preference, but Greystone 36-Inch Electric Fireplace with Crystals #324-000080 does offer two heat settings that can deliver either…

view full answer...

Answer 5

Good question, Linda. The Xtreme Heaters RV Basement and Boat Bilge Heater with Quick-Release Bracket 400 Watts #XH67FR pulls about 5.2 amps when running, with a brief startup inrush around 8 amps for a second or two. That’s well within what a 15A RV…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Can Flames Be Operated on Furrion 34 Electric Fireplace without Heat

Featured Help Information

Miscellaneous Media

Continue Researching