Replacement RV Stereo System for Quest QX-3202

Updated 09/04/2025 | Published 12/01/2019

Question:

I have a qx-3202 quest CD player for my 2007 camper and I would like to replace it. It’s opening is 8.11”W. And 9.76” H with a 12v 5A hook up. What could I replace this with ?

asked by: Paula M

Expert Reply:

I have a solution for you, but there is not a stereo that we have available that is the same size as your Quest QX3202. I recommend replacing your old unit with theiRV RV Stereo - Double DIN - HDMI, AUX, Bluetooth, App Control - 50W - 3 Zone - 12V Item # IRV64FR which requires a mounting space 6-11/16" wide x 3-15/16" tall x 6-11/16" deep. This is the closest match when it comes to specs and required opening size. The iRV64FR can provide stereo sound throughout your RV/travel trailer from an AUX/USB cord connected to your smart phone, as well as HDMI and Bluetooth connectivity. This unit can also play CDs and DVDs, so it's a fantastic all in one multimedia solution for your camper that will replace not only your stereo system, but your DVD player as well.

You would need to fabricate some type of veneer to cover the space created when mounting this in your old stereo's location; I've seen a lot of customers use a piece of plywood or MDF and have it painted the same color as the cabinet in order to provide a more clean installation look, but it isn't necessary.

expert reply by: Erik B

click to enlarge

Daniel A.

5/5/2025

Como es su conexión para que se me Active el amplificador How is it connected so that the amplifier activates

Heather A.

5/13/2025

@DanielA Para que se active el amplificador con el estéreo iRV64FR, debes usar el cable azul etiquetado como “AMP REM” (control remoto del amplificador) que viene en el mazo de cables del estéreo. Cómo funciona: Este cable envía una señal de 12V cuando el estéreo está encendido. Debes conectar este cable a la entrada de encendido remoto (remote) de tu amplificador. Esa señal le indica al amplificador que se encienda junto con el estéreo y se apague cuando el estéreo se apague. En resumen, la conexión que necesitas es del cable azul AMP REM del estéreo a la entrada “remote” del amplificador. Déjame saber si quieres ayuda para ubicarlo en el diagrama de conexión o si estás usando un modelo de amplificador en particular.

Debbie

9/2/2025

Referring to The article about the Quest QX3202. Ours just out of the blue started making a constant high pitched sound. The alarm is not sit on it. We had to pull it out of the wall and disconnect it to make it stop. Any ideas what it could be would be appreciated.

Jameson C.

9/3/2025

@Debbie The amp is probably damaged and would require replacing the entire thing. But there's off chance it just needed to be reset by pulling the power like you did. Have you tried powering it back on?

Debbie

9/3/2025

@JamesonC we did pull the power and let it sit a day. When we plugged it back in it didnt make the sound. So fingers crossed that helped it. Thank you.