Solera Universal 69" Awning Support Arms for RVs Hybrid In the Color White

Question

Question:

is this kit avaluable in white color ?

asked by: Frank R

0

Expert Reply:

Yes the Solera Universal 69" Awning Support Arms for RVs - Hybrid part # LC434727 is available in white with part # LC434728.

expert reply by: Heather A

0

Answer 1

To switch to a crank or powered awning you will need to change the end caps on your manual Solera Awning as well as remove the torsion spring. I recommend using the Solera 18V Power RV Awning Conversion Kit #LC434730 as this kit contains everything…

view full answer...

Answer 2

I spoke with my contact at Lippert to see if I could get some specifics regarding the fabric construction on the Solera 15' Sand Fade w/ Black Weather Guard RV Awning #LCV000223162 that you referenced. She stated that the fabric on this unit is…

view full answer...

Answer 3

That's a good question, and what you want to do is measure the roller bar assembly as opposed the fabric. For example if you measure the roller assembly and it is 15 feet you can use the Solera 15' White Fade RV Awning Roller and Fabric…

view full answer...

Answer 4

The best option we can offer for this situation would be a new set of awning arms which would allow you to reuse your existing tarp and roll tube so you don't have to spend as much to get your awning back up and running. The Solera Universal…

view full answer...

Answer 5

Yes, we have some 15' awnings but they are not currently available as a single kit. The Solera 15' Black Fade RV Awning Roller and Fabric (Std) #LCV000211480 can be paired with either the Solera 12V Power RV Awning Conversion Kit #LC434723 or…

view full answer...

Answer 6

Hey Dennis, The Replacement Roller and Fabric Kit for 15' Solera Power and Hybrid RV Awnings #LCV000211483 doesn't have any kind of built-in cover unfortunately. There are fabric options with an extra layer of material like the #LCV000223162…

view full answer...

Answer 7

For a manual deployed awning, we have available the Solera Universal Awning Support Arms for RVs - Hybrid - 69" Arms - White, #LC434728 and either the Solera 14' White Fade RV Awning Roller and Fabric, #LCV000211475 or the #LCV000223179 for…

view full answer...

Answer 8

For your 11x8 awning, I recommend the Lippert Components Solera 11' Sand Fade RV Awning Roller and Fabric (Std) #LCV000223153. If you need all of the hardware for this awning, I recommend the Solera Manual Hardware Kit for Pitched Awnings…

view full answer...

Answer 9

From the center line to center line of the brackets for the Solera 12V XL Power RV Awning - 16' Wide - Extra-Long 9'8" Projection - White Fade #LCV000334965-362241 it measures 16' as you can see in the attached photo. When I reached…

view full answer...

Answer 10

You mentioned needing a vent cover but asked about the E-Z lift vent itself, the Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White #V3092-601-00, so it sounds like you need the actual vent. And yes,…

view full answer...

Answer 11

Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below.

view full answer...

Answer 12

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Solera Universal 69" Awning Support Arms for RVs Hybrid In the Color White

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching