Timbren 7,000 lb Axle-Less Suspension System  

I have a solution for you but unfortunately the #RM-2460-2560 is designed for trailers with 3" axles. You can get just the shocks #RM-2450 and upgrade your equalizer with one such as #LC279688. Adding these two components to your trailer will…

The Timbren Silent Ride part #TSR7000T04 is exactly what you are looking for. It is designed to fit two Dexter 3,500 lb axles like you have. It shouldn't lift your suspension but you can check by measuring the distance between the axle center you…

Since the distance between the horizontal mounting holes on center of your current equalizers on your 2017 Keystone Outback is 5-1/2" and the MORryde Cre3000 equalizers that you purchased have are 6-1/2" you will either need to use shorter…

The best way to give your 2013 Forest River Wildcat extralite 312BHX a lift of about 2 inches will be with the tandem axle lift kit part #RR23QX which will raise the suspension 2 inches. Using the other shackle bolts you mentioned might make a slight…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

The shackle straps of the #AP233 are 2-1/4 inches in length from bolt hole center to bolt hole center.

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit…

It is definitely not recommended to drill a hole in your pin box to add another set of rows. The height of your pin box and hitch will be adjustable to an extent and then you will need to adjust the axles for further leveling. My recommendation is to…

First thing you want to do is verify that you are using the correct dimensions for your hanger spacing on your trailer. The distance between the center hanger and either of the outside hangers should be right at 29-1/2 inches. There should be at…

The Timbren Silent Ride #TSR14KT01 can actually be installed by welding it on or bolting it on. You could do both welding and bolt it on, but that is not really necessary. I am not sure of the bracket to move it around on the frame, but they do have…

I recommend checking out the Timbren Silent Ride Suspension #TSR7000T04 for your 2016 EZ Loader trailer. This will allow you to bolt the suspension to the trailer rather than having to have frame hangers welded on. It also uses a rubber spring…