Dimensions for Rhino-Rack Batwing and Foxwing Awning Mounting Kit # RR31103

Updated 06/11/2019 | Published 06/09/2019

Question:

How wide is the bracket overall and how wide are the widest drilled holes?

asked by: John W

Expert Reply:

I went out to our warehouse to take a few measurements on the Rhino-Rack Mounting Kit for Batwing and Foxwing Awnings # RR31103. The brackets have an overall width of 2-3/8 inches. The shorter portion has a length of 3-3/4 inches down to where it angles out and the longer end measures 7-1/2 inches in length. The wider bolt holes themselves measure 11/16 inch long.

On the shorter end the top two bolt holes are spaced apart by 1-7/8 inches on center and the distance from the top hole to the bottom hole (on center) is 3-3/4 inches.

On the longer portion the bolt holes are spaced apart by 1-3/8 inches horizontally. The distance between the hole at one end to the hole at the other is 4-1/2 inches.

I have attached an image with these dimensions labeled that you can also use for reference.

expert reply by: Chris R