Wiring a Brake Controller for 2005 Holiday Rambler Endeavor
Updated 05/15/2019 | Published 05/13/2019
Products Featured in This Question
Question:
2005 Holiday rambler endeavor wiring for brake controller. My coach is not pre-wired for brake controller. Are there wires running from front to back that I can use to install a brake controller? Do you have any diagrams? Or any suggestion on how we can do this? Appreciate any help you can offer. Thank you!
asked by: Joe
Expert Reply:
Based on my research your 2005 Holiday Rambler Endeavor is built on a Roadmaster Motorhome chassis and there are no custom fits for wiring harnesses and we have not been made aware of specific wires for this particular chassis. What that means is you are going to need to hard wire in a 4-way, the Upgraded Circuit Protected ModuLite with 4-Pole Flat # 119178KIT, along with the Universal Installation Kit for Trailer Brake Controller # ETBC7. Doing this will also require you use additional length of Deka Jacketed 2 Wire, 10 Gauge, Brake Wire # 10-2-1 due to the length of a motorhome, but it will allow you to use a brake controller like the Prodigy P2 # 90885.
I have added a link to a help article on installing a trailer brake controller from scratch which you can use as a guide.
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 2005 Holiday Rambler Brake Controller Recomendation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Does the Curt Base Plate Kit Work w/ the Ford Modular Bumper on a 2025 Ford Bronco Everglade?
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: How to Measure for Trailer Hitch Drop