Extang Platinum Replacement Tonneau Cover For 2007 Ram 1500 6-1/2 Foot Bed

Question

Question:

Extang Replacement Tonneau Cover 2007 Ram 1500 short bed. I need the correct part number for a replacement soft tonneau cover with snaps. My original cover is marked Extang Platinum. I need the cover only - the frame and bows are fine. Thank you.

asked by: William J

0

Expert Reply:

I reached out to my contact at Extang and the correct cover is the Replacement Tarp for Extang Classic Platinum Tonneau Cover-Black # EX6770 for your 2007 Ram 1500 Short Bed.

expert reply by: Jason S

0

Ed M.

4/24/2020

Gents, I have a 2006 Ram 1500 with 6.5 bed. The old cover is a Freedom. I counted the snaps on this Classic Platinum and its the same as on the Freedom. Can I use this EX6770 instead, especially since the Freedom is out of stock?

Chris R.

4/24/2020

Unfortunately, I don't think the Classic Platinum tarp will work to replace the cover on your Freedom model. I know it's probably not what you wanted to hear but I think your best option here may be a whole new tonneau. The Extang BlackMax # EX2770 is a really good option for your Ram at a pretty good pricepoint. I linked our full selection below as well.

Helpful Links

tonn-2006_dodge_ram+pickup.htm?style=6-1%2f2+foot+bed

Answer 1

Hey Denise, the Replacement Cover for Extang Classic Platinum #EX6790 is not going to work with your 2002 Dodge Ram 1500. You'd need to use the Replacement Extang Classic Platinum Tonneau Cover #EX6770 instead. If there is anything else I can do…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Extang Platinum Replacement Tonneau Cover For 2007 Ram 1500 6-1/2 Foot Bed

Continue Researching