What Size are the Trailer Hitch Bolts for a 2011 Dodge Grand Caravan
Updated 04/08/2019 | Published 04/06/2019 >
Question:
When purchasing the used vehicle, the dealer removed the trailer hitch, and discarded the bolts. Now, when trying to re-install the hitch, I need to know the replacement bolt sizes. The dealer was not helpful, and I have not been able to find the specific size info on the internet. Best I can fiqure is two metric bolts are required: M10-1.50x50, Class 10.9, and M12-1.75x50, Class 10.9, both Hex Flange bolts. The 50 mm length seems like overkill. Can you please confirm the specific bolt descriptions? Thanks for the help.
asked by: Neal I
Expert Reply:
According to my research, you are correct in that you need both M10 and M12 fasteners. However, I don't have the exact length that you need. With that being said, so long as they go all the way through the weld nuts in the frame that won't really matter. I don't think 50mm is overkill so this is what I would try first.
I called Curt but they could not provide this information. The fasteners that you are referring to are supplied by the manufacturer which is why there is such limited information on them. I am very surprised that the dealer would not inform you of their size as they are the only ones that are going to for sure have this information. I suggest you reach out to another dealer and ask for the parts department specifically.
The other option you have is to go to a junkyard and pull the bolts yourself but I recommend just using these for the correct size and then going to buy new.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Hitch Receiver Fitment for 2027 Kia Sportage Hybrid
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Wiring Diagram for Kwikee Step Motor Conversion/Upgrade Kit # LC379145
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Wiring Instructions For A Dometic RV Water Heater Single-Panel Control Switch
- Q&A: Will Two Sets of the Erickson ATV E-Track Tie-Down Kit Work for a 3K RZR
- Q&A: Weight Capacity of Erickson ATV E-Track Tie-Down Kit # EM09160
- Q&A: Can You Convert 4 Way Plug To Work With Trailer Brakes?
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Trailer Hitch Installation Tips

