Single Bowl Sink Recommendation that Measures 27 inch by 16 inch

Question

Question:

I am looking for a single compartment in sink measuring 27” x 16” do you all have a in sink this size?

asked by: Jana B

1

Helpful Expert Reply:

We have the Better Bath RV Sink part # LC385313 which is 27 inch by 16 inch like you said you want and has a single bowl. This is an undermount and we do not carry any that mount over the counter.

expert reply by: Jameson C

1

click to enlarge

Answer 1

For a 25-3/4" x 14-3/4" cutout we have the following single bowl and double bowl options: Single Bowl: Better Bath RV Kitchen Sink #LC385313 Double Bowl: Better Bath RV Kitchen Sink #LC388412 Better Bath RV Kitchen Sink #LC385314 LaSalle…

view full answer...

Answer 2

I suppose you could drill a hole into the Better Bath RV Kitchen Sink part #LC388412 to mount your faucet/tap but that is not really it's intended use as it is mainly used in under-mount applications. If you were to use this sink as a top-mount…

view full answer...

Answer 3

While the Better Bath Double Bowl RV Kitchen Sink #LC388412 was intended to be an undermount sink you certainly could install it as a drop-in.

view full answer...

Answer 4

The Better Bath Double Bowl RV Kitchen Sink Item #LC388412 depth measurement, front to back of the bowls, is 13-3/4 and has width of 24-3/4. If your opening is 25-3/4 x 14-3/4 then you will potentially have an inch of the top edge of the sink flange…

view full answer...

Answer 5

The Better Bath RV Kitchen Sink #LC385313 has an inch of overhang on each side with an internal measurement of 13-7/8" long x 25" wide so it'll have enough overhang to properly fit your 26" x 15" cutout.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Single Bowl Sink Recommendation that Measures 27 inch by 16 inch

Product Page this Question was Asked From

Continue Researching