How Long of Frame Channel is Needed to Install Titan Model 6 Actuator
Question:
I have to grind off old actuator and sway bartto install the new one I bought from you. length of 3 tube required on trailer to install Mdl 6 Titan actuator Thx
asked by: Robert G
0
Expert Reply:
The mounting flange length of the Titan Model 6 actuators is 9-1/2 inches and the additional length the master cylinder adds to that is 6 inches so you'd want to have around 16 inches of frame channel to install a Titan Model 6 actuator like the part # T4079200 that you referenced.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Similar Expert Q&A Pages
- Overall Length of the Titan Model 6 actuator # T4079200
- Replacement Surge Brake Actuator and Calipers for 2001 Four Winns Boat Trailer
- Is Mounting Hole Spacing The Same On T4079200 And T4853100 Trailer Couplers
- Recommended Replacement Actuator for a TDE Model LP8000 Class lV Actuator
- Does Titan Model 6 Actuator Need Reverse Lock Out Solenoid
- Solution for Banging During Starts and Stops with Titan Model 6 Actuator on Trailer
- Replacement Titan Brake Actuator for Titan 3241639
- Regular Trailer Coupler to Replace Titan Model 6 Actuator T4079200
- Replacement Master Cylinder Recommendation for Titan Model 6 Drum Actuator T4079200
- Are Titan Disc Brake Actuators Compatible with Demco Brakes and Brake Lines
- Replacement Surge Brake Actuator For Worn Out Tie Down Engineering Model 8000
- How to Reset Breakaway Lever on Titan Model 6 Zinc-Plated Brake Actuator T4079200
- Is the Titan Zinc-Plated Brake Actuator T4079200 Suitable for Boat Trailers
- Hydraulic Brake Actuator and Brake Lines for Drum Brakes to Homemade Trailer
- Coupler Lock Recommendation for Use on a Titan 2-5/16 inch Coupler part # T4079200
- Replacement Master Cylinder Cap for Titan Model 6 Actuator
- Hydraulic Surge Brake With Manual Lockout Feature
- Recommended Electric Lockout or Free Backing Brake Assemblies for Surge Brake Actuator
- Can a Surge Brake Actuator be Installed on a Swing Away Trailer Tongue?
- Why Are Some Trailer Couplers Rated Near 8,000 lbs Available for 2 inch and 2-5/16 inch Hitch Balls
- Replacement Cap and Breakaway Lever for a Titan Model 6 Actuator
- Availability of Surge Brake Actuator Designed for 2-5/16 inch Hitch Ball
- Is 8,000 Pound Titan Brake Actuator Sufficient for Trailer with 7,900 Pound GVWR
- What Brake Actuator Replaces The TDE Model LP8000 Class IV Actuator
- Is Braking Affected By Switching From 6,000 lb to 8,000 lb Hydraulic Drum Brake Actuator
- Recommended Replacement Actuator for GDC-80
- Replacing a GDC100 Surge Brake Actuator
- Replacement for Titan Model 6 Trailer Brake Actuator