Stainless Steel Disc Brake Kit for 8 on 6-1/2" Bolt Pattern
Published 10/24/2018
Products Featured in This Question
Question:
Do you offer an all stainless disc brake package for 8 bolt 6 1/2inch hubs? I can only find the Dacromet + Stainless combination?
asked by: Grant P
Expert Reply:
Yes, there are all stainless steel disc brake kits that have an 8 on 6-1/2" bolt pattern.
The Kodiak Disc Brake Kit # K2R858DS is designed for 8,000 lb Dexter axles with a #42 spindle, 4-bolt brake flange and idler hubs with 5/8" diameter wheel studs. The Kodiak Disc Brake Kit # K2R89DS is the same but fits idler hubs with 9/16" diameter wheel studs.
The other kit available with an 8 on 6-1/2" bolt pattern is the Kodiak Disc Brake Kit # K2R712S which is rated for 7,000 lb axles with #42 spindles, a 5-bolt brake mounting flange and an idler hub with 1/2" diameter wheel bolts.
I've added links to video reviews of the kits for you to take a look at.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Stainless - 5/8" Bolts - 8K Dexter Axle
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Jack for Welded On Jack Bracket with 4 3/8" x 3 3/8" Dimensions Center-to-Center
- Q&A: Replacement Jack For Fulton F2 Jack
- Q&A: What Torque Do The Kodiak Disc Brake Calipers for 7K-8K Axles Require
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: Torque Specs for Installing Kodiak Replacement Mounting Bracket for Disc Brake Caliper
- Q&A: Replacement Caliper Guide Bolts
- Q&A: Finding Replacement Caliper Bolts For A Tie Down Engineering 46304 Calipers
- Article: How to Accurately Measure Trailer Leaf Springs