Kodiak Disc Brake Kit for 12,000 lb Axles

Published 10/05/2018

Question:

How do i find out if i have an 8 on 6-1/2inch bolt pattern and a 7-bolt brake flange.

asked by: Jeremy

Expert Reply:

The Kodiak Disc Brake Kit # K2R1258L12 you referenced is a fit for 12,000-lb Dexter and Lippert axles with leaf springs.

Keep in mind your current idler hubs need to have an 8 on 6-1/2" bolt pattern and a 7-bolt brake flange. If you are not sure what bolt pattern you have I've added a link on this page to a help article that explains how to determine your bolt pattern. I have also added a link to a help article on adding disc brakes which you may find useful.

expert reply by: Kyle S

click to enlarge

Jeremy

10/5/2018

How do i find out if i have an 8 on 6-1/2inch bolt pattern and a 7-bolt brake flange.

Kyle S.

10/5/2018

You can take a look at the linked help article on this page which details how to go about finding your bolt pattern. As for a brake mounting flange it will be on your axle already and will be similar to the flange that is shown in the accompanying photo, although with 7 bolts.