Recommended Cover for Winnebago Winnie Drop With Rear Door

Question

Question:

I need a cover with the zip opening at the back of the cover for a Winnie The one suggested has the Zip opening at the front, is there nor enough drops and rpods to make covers for out campers?

asked by: Kim K

0

Expert Reply:

If you have the Winnebago Winnie Drop WD170S which has an overall length of 20 feet 4 inches, then I recommend the Adco SFS AwuaShed Cover # 290-52241. This particular cover features passenger side zipper entry doors at both the front and rear of the trailer so you won't have any issues accessing your trailer when it's in storage. It is designed to hold up well in wet climates and features high-performance polypropylene sides that allow for maximum breathability. It comes with a 2-year warranty as well.

expert reply by: Chris R

0

Sue

3/23/2020

Looking for a cover for a Winnebago Minnie 20” camper trailer. Can u recommend a cover?

Chris R.

3/24/2020

Does the 20 foot length you mentioned on the Winnebago include the tongue? If this length refers to just the body of the trailer, then the Adco # 290-52241 mentioned above will work really well. If the 20 foot length includes the tongue (or you're unsure), please let me know what specific model Minnie you have and I will be happy to verify a good fit or recommend an alternate option.

Helpful Links

RV-Covers/Adco/290-52241.html

Will

5/17/2025

My 2018 Winnie Drop 170S is 17’7” ; the hitch adds 34”. Just want to cover the 17’7”

Kate F.

5/21/2025

@Will You will want the Adco SFS AquaShed RV Cover for Travel Trailers up to 18' Long - Gray # 290-52239 for your 2018 Winnie Drop that is 17'7". Taking your Winnie out on any big trips this year? If so, where are you headed?

Answer 1

I recommend using the Classic Accessories Deluxe PolyPro III HD Cover #CA80200 for your 2018 Winnebago Minnie Drop 1790. We actually had someone install this on a 2017 Minnie Minnie Drop 1790 and they said it fit like a glove so I know you'll be…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Rudy, thanks for the information! The Firestone Ride-Rite Air Helper Springs item #F2558 is designed for the factory suspension on a 2019 Nissan Frontier SV. The brackets will work with up to a 1" suspension lift without the need for…

view full answer...

Answer 5

Hello again Ed! You probably ended up outside our fitguide with some of the Timbren the parts you were looking at. The Timbren SES severe service kit is designed for constant loads like a truck bed camper or salt spreader. Regardless, a severe…

view full answer...

Answer 6

Thanks for the picture of your current vent! Based on the measurements you showed in your picture the correct replacement screen is the Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents in Birch White #BVC0573-31R…

view full answer...

Answer 7

Mike for your Dexter 3.5k axle, you can use the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles #e54SR. You'll want to verify that your current spring measures 25 1/8" from eye to eye, and has a 1 3/4" spring width. If it does,…

view full answer...

Answer 8

The Classic Accessories PolyPro III Deluxe Travel Trailer Cover part #052963732634 is a great fit for your trailer. It's designed for trailers that are between 20 and 22 feet like yours and has zippered access panels that will line up with the…

view full answer...

Answer 9

Hi Lisa, congratulations on the new camper! The Classic Accessories PolyPro III Deluxe RV Cover #052963731637 is 104" tall. Looking at the specs for your 2026 No Boundaries NB19.2 Beast Mode it is actually 21' 10" long so this isn't…

view full answer...

Answer 10

Your dealer has you going in the right direction. With a measurement of 23 feet 8 inches from the rear bumper to the back of the propane tank cover you should select a cover with dimensions that your RV falls into. The PolyPro III Deluxe Travel…

view full answer...

Answer 11

I do have a great option for you, however there isn't an R-Pod specific storage cover available for your 2020 195 model, as it's a bit longer than other models and the custom-fit options are specifically designed for the shorter R-Pods. For…

view full answer...

Answer 12

Hey Matt, Yes, what you're seeing is the maximum speed rating from the manufacturer. This means that they tested the tire to this speed and it still met all of their requirements. The biggest enemy of tires is heat so at a certain point the speed…

view full answer...

Recommended Cover for Winnebago Winnie Drop With Rear Door

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching