Installing Pop & Lock Custom Tailgate Handle # PAL8540 on 2013 Toyota Tacoma

Updated 08/13/2018 | Published 08/11/2018

Question:

I am Currently intalling this kit on a 2013 Toyota Tacoma access cab and the instructions state that a blue with light red wire and blue with black wire run up to the door and those are the lock and unlock wires however i can Not find any blue with black wire running to the door any information is helpful.

asked by: Mark L

Expert Reply:

The two blue wires (one with red stripe and one with black stripe) will be found just inside the driver side door under the bottom plastic panel. The panel will need to be pulled up and the needed factory wires will be inside a black loom. I have attached an installation video on the 2015 Tacoma that you can use for reference. The process should be identical on your truck.

Please let me know if you still cannot locate the correct wires and I will be happy to look into this further.

expert reply by: Chris R