How Wide a Coupler Lip Will The Reese Coupler Lock Accommodate?

Question

Question:

My 2 5/16 coupler is pretty wide. Do you know how wide of a coupler will fit in this lock?

asked by: Dennis

0

Expert Reply:

The Reese Tow and Store Lock Kit - Keyed Alike # RP7014700 has a 4 inch width between the inside edges of the u-bolt. As long as your coupler width is under 4 inches, it will work fine.

expert reply by: Jason S

0

click to enlarge

Answer 1

It sounds like you might have the Bulldog Lifelong Trigger-Style Coupler Lock part #BD580404 and if that is the case then I have attached for a you a review video on how to operate the lock. That said, if the lock has been on for six years without…

view full answer...

Answer 2

Yes, rubber wheel chocks such as the Buyers Products 5" Wheel Chock part #337WC1467A tend to have a better grip on asphalt and pavement when compared to plastic which can have a tendency to slide. I personally prefer rubber wheel chocks to…

view full answer...

Answer 3

Utilizing wheel chocks like the Anderson Tuff Chock #3605 wouldn't be ideal for the angle you are stating. Of course the weight of the boat is likely not distributed evenly over the axle, there are some chocks I believe would work for the…

view full answer...

Answer 4

For an inline water filter, I recommend the Camco RV and Marine Disposable Water Filter w/ Hose Protector - KDF/Carbon #CAM40043. This will give you a 100 micron barrier to remove bacteria, odor, chlorine, and more. It is for 1 camping season use.…

view full answer...

Answer 5

When installing a trailer coupler like the Etrailer A-Frame Trailer Coupler, part #CA5100B, you want the coupler right up against the edge of the trailer frame. This coupler is a weld-on coupler for A-frame trailers. I would recommend having a…

view full answer...

Answer 6

The fully extended length of the #TJ01RT-HD stabilizer jack would be 18 inches, which represents the 'A' Dimension in your photo. The 'B' dimension would simply be the height above the ground of the underside of your trailer when its…

view full answer...

Answer 7

We currently only offer a 2" piano hinge with a 1/4" diameter pin in a 72" length so you would need to purchase two and cut one down to cover the rest of the 83-1/2" of length you're needing.

view full answer...

Answer 8

Hey Heather, unfortunately the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT is keyed unique so it's not available to be keyed alike. Instead, you'd have to use something like the Master Lock Set #ML44VR which come…

view full answer...

Answer 9

Hey Steve! You'll need to pick up replacement keys from Trimax directly. Here is a link to their website - https://trimaxlocks.com/shop/keys/receiver-coupler-replacement-key/ Did you lose your keys, or are you just wanting to pick up some extra…

view full answer...

Answer 10

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 11

Yes, the Kuat Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch item #KU93VR will reduce the rattle and movement you are getting in your Ford F-350 2-1/2" hitch receiver.

view full answer...

Answer 12

Great question. Without cutting a hole you wouldn't be able to get enough clearance for the jacks to work. I would strongly recommend using them on the outside to prevent clearance issues and probable damage. However, I think you would be better…

view full answer...

How Wide a Coupler Lip Will The Reese Coupler Lock Accommodate?

Featured Help Information

Miscellaneous Media

Continue Researching