Troubleshooting Trailer Lights Not Working

Updated 07/13/2018 | Published 07/12/2018

Question:

I have a 2017 Hyundai Tuscon with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118501 installed. Everything has been working fine but recently the trailer lights stopped working. I checked the fuse and it was not blown. I replaced it anyway and the trailer lights worked briefly but then stopped and will not work now. I tested the trailer lights with another vehicle and they all work fine. I have checked all the wires and connections on the trailer and Tuscon and everything look fine. Any ideas why the trailer lights are not working?

asked by: Keith H

Expert Reply:

In many cases a bad ground is to blame for this type of issue, but in order to determine the specific problem you'll need to use a circuit tester such as # PTW2993 to test the connector on your Tuscon after disconnecting it from your trailer. Check the wiring going into your harness from your taillights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring. If the signals going to your harness are okay, you'll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring.

As I mentioned above, an important issue you will want to take a look at are the ground connections, as they can be the cause of numerous lighting problems. You'll want to make sure your grounds are securely attached to bare metal surfaces free of any paint, dirt or corrosion of any kind. Also check your wiring thoroughly to ensure there are none that are crimped, broken or otherwise damaged. I've added links to a pair of help articles on trailer wiring that you may also find useful.

expert reply by: Kyle S