Recommended Weight Distribution System Shank for 2-1/2 Inch Trailer Hitch Receiver
Updated 07/11/2018 | Published 07/09/2018
Products Featured in This Question
Question:
I have a weight distributing hitch Reese #54970 12000 lbs hitch. I switched to 2.5 hitch and want a receiver to match. Are the ball mount spacing all the same between different make receivers. Can I mount my Reese ball mount on another brand receiver? What do you recommend?
asked by: Tim M
Helpful Expert Reply:
The Reese Weight Dist Shank # RP54970 you referenced does have the same 1-1/4 inch on center height adjustment holes that is the standard for weight distribution systems. These shanks can be mixed between manufacturers.
For your 2.5 inch hitch, I recommend using a shank made for that receiver like the Curt Weight Distribution Shank for 2-1/2" Hitches # C17131. This will allow your weight distribution system to connect to your 2-1/2 inch hitch receiver.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How To Determine The Correct 2-1/2" Shank For Reese Weight Distribution Hitch?
- Video: Detailed Breakdown of the Curt Weight Distribution Shank for 2-1/2" Hitches
- Shop: BulletProof Hitches Weight Distribution Shank for 2-1/2" Hitches - 8" Long - 9 Hole Adjust
- Shop: Blue Ox TrackPro Weight Distribution Shank for 2-1/2" Hitches - 9 Hole Adjustment
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop