Trailer Hitch Receiver to Fit a 1995 Mercury Sable that Doesnt Require Drilling

Updated 07/07/2018 | Published 07/05/2018

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(11)

$418.06

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(31)

$419.10

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(3930)

$13.94

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3930)

$10.91

Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs

(2289)

$43.24

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(155)

$169.33

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2955)

$3.51

Question:

Does this hitch require drilling to install on a 1995 Mercury Sable 4 door sedan?

asked by: Don

Expert Reply:

The Curt trailer hitch receiver that fits the 1995 Mercury Sable is part # C12232 and it does not require any drilling to install it. The hitch you looked at, part # C11207, does not fit the Sable at all. It actually fits the Honda Civic and Acura EL from the late 1990s.

With the correct # C12232 hitch you also need to add a ball mount. The recommended one is part # C45522 with either the 2 inch hitch ball # C40018 or the 1-7/8 inch hitch ball # C40001. You also need a pin and clip, part # F-4.

The correct wiring harness I recommend is part # C59496. I've attached an install video of the wiring on a 2005 Grand Marquis. It's a universal harness so the install process is pretty similar.