Keel Roller Center Diameter Dimension of # YR1200Y
Updated 06/12/2018 | Published 06/11/2018
Question:
I would like to know the diameter of the keel roller in the very center, where the keel would ride. I have limited clearance in this area after the installation of the Keel Guard protector and now my original black rubber roller will not fit. There is interference with the keel of the boat, so I need a roller that is smaller in diameter at the point where the keel rides. My current roller is 2 3/8inch diameter, so I am looking for a roller that would be somewhere around 1 3/4inch to 2inch in diameter, in the center.
asked by: Randy C
Helpful Expert Reply:
The Yates Keel Roller for Boat Trailers - TPR - 12" Long - 5/8" Shaft - Blue # YR1200B has a diameter of 2.1 inches at the center when I measured it using a digital caliper. It sounds like this will work well for your 2 inch diameter need as that measurement is not compressed in the slightest.
Product Page this Question was Asked From
Yates Keel Roller for Boat Trailers - TPR - 12" Long - 5/8" Shaft - Blue
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3 Inch Diameter
- Plastic
- 11-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is Difference Between Bearing Seal NOK # AD2527E and # AD2527EO
- Q&A: How to Determine Fit of 12" CE Smith Keel Roller for Boat Trailers
- Q&A: Load Capacity of Yates V Keel Roller
- Article: Spring Towing Readiness Checklist
- Q&A: What Are the Differences Between Yellow, Blue and Black Boat Rollers
- Q&A: Mounting Hole Dimensions for Fulton XLT Winches
- Q&A: Using Two Bow Stops on Either Side of a Boat Trailer Winch
- Q&A: Replacing Bow Strap and Winch Mount on on Older Shoreline Sailboat Trailer
- Article: Trailer Lighting Requirements
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: 7 Common Questions Everyone Has About Trailer Tires