Installing Tekonsha Voyager Brake Controller in 2005 Chevy Silverado With Factory Connector
Updated 05/25/2018 | Published 05/24/2018
Products Featured in This Question
Question:
what is the right way to wire a tekonsa voyager controller to 2005 chevy silverado using the silverado provided connector. Do I have to swap power feed colors?
asked by: Dale
Expert Reply:
To install the Tekonsha Voyager # 39510 brake controller in your 2005 Chevy Silverado you do not have to do anything but plug the factory connector into the electrical junction box on the driver's side, left of the brake pedal (assuming your truck has the factory 7-way). The brake control adapter is plugged into the second slot from the left on the top row.
If you do not have the factory 7-way you will need to use the Universal Installation Kit for Trailer Brake Controller # ETBC7; you can then follow the specific directions in the linked article I've added which details how to install your controller.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Adding Electric Over Hydraulic Disc Brakes to Boat Trailer
- Q&A: Parts Needed To Replace Surge Coupler For Disc Brakes With Electric Over Hydraulic
- Q&A: Recommended Actuator and Wiring for Boat Trailer Upgrade From Surge Brakes
- Q&A: Converting Surge Brakes to Electric Over Hydraulic on a Tandem Axle Boat Trailer