Positioning Running Boards of CE Smith Boat Trailer to Fit Sun Dolphin Sportsman 10
Updated 05/24/2018 | Published 05/23/2018
Products Featured in This Question
Question:
Hi, bought the Smith utility trailer. What’s the best way to mount the runner boards for Sun Dolphin Sportsman 10. Down center seems to narrow and horizontal seems to close together for front support. Thanks
asked by: Dennis
Expert Reply:
I looked up pictures of your Sun Dolphin Sportsman 10 mounted on trailers and it looks like most poeple space the bunks far enough apart so that each "pontoon" of the boat sits on top and then straps are then ran around the boat and the trailer like the CE Smith # CE48810.
Ratchet straps like the Erickson Ratchet part # EM78627-MS would work well.
Product Page this Question was Asked From
Erickson Ratchet Tie-Down Strap w Double J-Hooks - 2" x 27' - 3,300 lbs
- Ratchet Straps
- Flatbed
- Trailer
- Truck Bed
- Double-J Hooks
- 1 Strap
- Manual
- 21 - 30 Feet Long
- 1-1/8 - 2 Inch Wide
- 2001 - 3500 lbs
- Erickson
more information >
Continue Researching
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Q&A: Compatibility of 17.5 Rims and Tires To Replace 16 Inch Trailer Wheels
- Q&A: How to Use a Dexter Electric Over Hydraulic Actuator with a 2014 Ram 3500
- Q&A: Replacement 7 Spoke Aluminum Trailer Wheel for Aluma Trailer
- Q&A: Are Replacement Pitch Arms Available for Solera RV Awning
- Q&A: Which Tow Dolly Wheel Straps for Demco Kar Kaddy SS and Jeep with 34 Inch Tires
- Q&A: Wheel Straps for Large Size Tires Over 35 inches Tall and 12 Inches Wide
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs