Replacement Kodiak 13" Hub and Rotor with 8 on 6-1/2" Bolt Pattern
Updated 04/18/2018 | Published 04/17/2018
Products Featured in This Question
Question:
Rotor/hub-133-7-8-DAC is the # Kodiak trailer gave me , what is the part I need to replace this ? Also a good high quality grease cap, something with thicker metal like in picture these are on a dexter 7000 lb triple axle car trailer
asked by: Fred
Expert Reply:
The part 133-7-8-DAC you referenced is a Kodiak 13" hub and rotor with a 8 on 6-1/2" bolt pattern, 1/2" lug studs, and a dacromet finish. I do have options that will work for you but we do not have this exact replacement. Instead, we have the raw part # KHR13712 and e-coat part # KHR13712E versions of this hub/rotor.
Please note that none of the above hub/rotors come with the bearings or seal. To replace them you will also want to use the following:
Inner Bearing - part # 25580
Outer Bearing - part # 14125A
Grease Seal - part # RG06-070
Unfortunately, we do not have a grease cap that will work with the above hub/rotors. You would need to find one designed to fit a 2.715" opening.
