Trailer Hitch, Ball Mount, Ball, and Wiring Recommendation for a 2006 Ford E-150 with Step Bumper

Updated 08/03/2011 | Published 08/02/2011

Products Featured in This Question

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2635)

$11.37

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1362)

$15.49

2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless Steel - 6,000 lbs

(28)

$46.67

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(177)

$43.69

Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long

(3914)

$33.14

Question:

We are looking for a bolt on 2 square receiver hitch for a 2006 Ford E-150 van. I dont know the differences between the different hitch classes. What would you recommend? The maximum trailer weight well pull is about 3500lbs but we do travel fairly long distances. Would a step bumper work as well? Thanks.

asked by: Tim

Expert Reply:

For a 2 inch trailer hitch receiver, you will want a Class III or higher. I have incldued a link to an FAQ article that explains the differences amongst the various hitch classes.

For your 2006 Ford E-150 Van, I recommend the Draw-Tite Trailer Hitch, # 75703. This is the most popular 2 inch hitch for your vehicle. I have included a link to the installation instructions and a link to a video showing a typical installation for you to view.

The hitch can be installed if the van has a step bumper, but a longer ball mount will be needed, like # D-26, than the one we normally would recommend for this hitch and vehicle. For a hitch pin and clip use # PC3. For a ball you can use # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63853 (2-5/16 inch diameter). For trailer wiring, use # C56020. I have included a link to the installation details for the wiring.

expert reply by: Michael H