Transmission Filter Relocation Kit # D13091 and Transmission Cooler # D13504
Updated 05/13/2011 | Published 05/12/2011 >
Products Featured in This Question
Question:
If I put a filter relocator on my tranny should I take the filter out of the tranny? If you leave it in and it gets plugged , you would damage the tranny. I dont like changing that filter that is why I would relocate, then i could change it more, like every time I do engine oil
asked by: Lyle
Expert Reply:
You would not want to remove the internal filter in the transmission of your F250 if you were to install a Derale Remote Transmission Filter Kit, part # D13091. This kit is designed to aid in the filtration process but is not designed to be the sole fluid filter in your transmission. I would recommend you install this kit and also leave the internal filter in your transmission as well.
If you were to change the remote filter regularly you would not have to change your internal filter or transmission filter as frequently. Especially if you were to install a Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13504, like you referenced as well.
I attached an FAQ page on transmission coolers, as well as a video of one being installed on a vehicle for you to check out.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 11W x 12T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Derale Series 8000 Require Additional Adapters for 2017 Chevy Silverado 1500
- Q&A: 2001 F350 7.3 Powerstroke Best Auxiliary Transmission Cooler D13105 vs D13504
- Q&A: Recommended Transmission Cooler for a 2014 Chevy Silverado 1500 with the 4.3L V6 Engine
- Q&A: Installing a Transmission Cooler on a 2010 Chevy Avalanche
- Q&A: Trailer Hitch Option For Motorhome With 39-1/2 Inch Frame Width
- Q&A: Is The Replacement Voyager Housing # SIDHSH50WT Compatible With VCMSYL50IR/VCMSYL50IL Cameras
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Transmission Cooler
- Article: Brake Controller Installation: Starting from Scratch
- Article: Frequently Asked Questions About Transmission Coolers
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers



