Trailer Hitch and Wiring Recommendations for a 2013 Ford Explorer Police Interceptor
Updated 09/14/2017 | Published 09/13/2017
Products Featured in This Question
Question:
do i need a power converter for my2013 ford explorer. also does reciever fit 2013 ford explorer police intercepter
asked by: STEVE R
Helpful Expert Reply:
First, we have had reports that Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 76034 does fit the 2013 Ford Explorer Police Interceptor model.
When adding a 4-Way trailer connector, # HM40285, to the Explorer it does require a direct connection to the vehicle battery, so it does have a powered converter. But your Explorer might be factory prewired for a trailer connector. Check under the vehicle for the factory wiring as shown in the video I have linked for you.
If it is there you can use a circuit tester such as # PTW2992 or a meter if you have one to test the pins on the factory connectors while someone sits in the vehicle and operates the lights. If the factory harness has power, then you can plug in # 118272 for a 7-Way or # 118540 for a 4-Way.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Mounting Bracket For Ford Explorer With Draw-Tite Hitch & T-One 7-Way
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How to Determine if 2014 Ford Explorer Has Factory Tow Package
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Mobility Chair Carrier for Jazzy 1450 Mobility Chair
- Q&A: Trailer Wiring for 2016 Ford Explorer that Does Not Require Splicing Into the Vehicle's Wiring
- Q&A: Inner Diameter of Tang Spindle Washers Close to 1-5/8 Inches
- Article: Gooseneck to 5th Wheel Adapters
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Testing Trailer Brake Magnets for Proper Function