Recommended Trailer Hitch with Closed Crosstube Ends for 2016 Jeep Patriot

Updated 08/24/2017 | Published 08/23/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(28)

$181.15

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(340)

$191.36

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(246)

$190.21

Question:

12057 Are the ends of the cross tube open or sealed over by the mounting plate on the end? My concern with the 74712 trailer is the ends of the cross tube are opened and able to collect water, sand and salt. Please advise ty very much

asked by: Ann W

Expert Reply:

The Curt Trailer Hitch Receiver # C12057 referenced in your question is indeed closed off at the ends of the cross tube by the mounting plates. The crosstube does not feature open ends like what you are seeing on the Draw-Tite # 75712 that you also referenced.

If this is a concern for you, then the Curt # C12057 will be the better option. You may also consider going to a Class III with the Curt # C13081, which is also confirmed to fit your Jeep Patriot. A Class III hitch will not only provide an upgrade in terms of weight capacity, but it will also feature a larger 2 inch receiver opening. Having a 2 inch opening, as opposed to 1-1/4 inch on Class II hitches, will give you many more options to choose from with regards to accessories like bike racks and cargo carriers. The ends on this Curt hitch are also sealed by the mounting plates.

Just note that with either Curt hitch, you will need to use stabilizing straps like # 18050 with any non-trailer loads such as bike racks. I have attached an installation video that you can use for reference.

expert reply by: Chris R