Will the Derale Series 8000 Transmission Cooler Part # D13504 Replace the Factory Cooler
Published 08/23/2017 >
Products Featured in This Question
Question:
I have a 2002 GMC Sierra 4.8 engine and tow package. Can I remove the factory oil cooler and replace it with D135004? Installing 2 cooler will be troublesome with the room available and air flow.
asked by: Douglas W
Helpful Expert Reply:
If you will be towing for extended periods of time then I do not recommend replacing your factory oil cooler. I would instead install the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets part # D13504 in conjunction with the factory transmission cooler as this will be much more beneficial for your transmission than swapping it out. If you will not be towing frequently with the vehicle then you should be okay to replace your factory cooler with this aftermarket cooler.
Since you have identified space as being an issue, I recommend leaving your factory transmission cooler installed in addition with installing a remote mount transmission cooler like the Derale Dyno-Cool Remote Cooler with Fan and AN Inlets part # D12733 as this will be the most efficient method to cool your vehicle's transmission fluid.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 11W x 12T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Derale Series 8000 Require Additional Adapters for 2017 Chevy Silverado 1500
- Q&A: 2001 F350 7.3 Powerstroke Best Auxiliary Transmission Cooler D13105 vs D13504
- Q&A: Recommended Transmission Cooler for a 2014 Chevy Silverado 1500 with the 4.3L V6 Engine
- Q&A: Installing a Transmission Cooler on a 2010 Chevy Avalanche
- Q&A: Trailer Hitch Option For Motorhome With 39-1/2 Inch Frame Width
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: What is the Difference Between Class IV and V Transmission Coolers
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Transmission Cooler
- Article: Brake Controller Installation: Starting from Scratch
- Article: Frequently Asked Questions About Transmission Coolers
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers


