Cushioned Pin Box Recommendation to Replace Fabex 500

Question

Question:

Am looking to upgrade my pin box am looking at the air ride so how do I figure out which air ride will fit my 5thfoot wheel all I see a sticker on my pin box my 5th wheel Fleetwood 2004 model number 500 made Fabex Elkhart lndiana. please contact me

asked by: Dave

0

Expert Reply:

We have an air ride cushioned pin box to replace your Fabex 500 that will work great to smooth out your ride quality.

For that you would want the 5th Airborne part # 5AB-E510-710 which is a confirmed fit.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…

view full answer...

Answer 2

The first thing I recommend doing is simply making sure that your 2017 Ford F-250 has the towing capacity needed to pull the Grand Design Solitude 373FB Trailer. There are a variety of aftermarket components that will allow the truck to operate…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 6

Yes, it does Ray. The Shocker 5th Wheel to Gooseneck & Demco Lock Coupler item #SHK89YR has 3" of offset compared to a standard gooseneck pin box like item #GY45GR. This pin box also has a built-in air spring and bump stops that absorb road…

view full answer...

Answer 7

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…

view full answer...

Answer 11

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 12

No, I am sorry it does not. I just spoke with Lippert and none of the Curt Helux Shock-Absorbing 5th Wheel Pin Box like item #C73RJ are compatible with gooseneck adapters like the Anderson Ultimate 5th Wheel Hitch. You would need to use a standard…

view full answer...

Cushioned Pin Box Recommendation to Replace Fabex 500

Continue Researching