How To Install The Pop & Lock Custom Tailgate Lock Part # PAL8600 On A 2017 Honda Ridgeline

Updated 07/13/2017 | Published 07/11/2017

Products Featured in This Question

Pop & Lock Custom Tailgate Lock - Power - Black

(482)

$109.97

Hook Probe Circuit Tester

(70)

$12.41

Question:

I have the 2017 Honda Ridgeline and have watched the install instructions and the wiring colors are not the same a the video. We have a bundle of wires in the area on the drivers side kick plate. What colors are used to make it work??

asked by: Douglas N

Expert Reply:

In order to install the Pop & Lock Custom Tailgate Lock part # PAL8600 on your 2017 Honda Ridgeline, you will need to find the red and yellow wires located underneath the driver's side kick panel. Once found, you will need to use the wire splice connectors found in the kit and attach the green wire on the tailgate lock to the red wire on the vehicle and the blue wire on the tailgate lock to the yellow wire on the vehicle. You may also want to double check the wires before you make the connections using a circuit tester like part # PTW2993.

If your vehicle does not have power locks, you will need to use the Switch Kit for Pop & Lock Power Tailgate Lock part # PAL9520 instead.

expert reply by: Conner L