What Drain Trap Does Camco RV Drain Hose w/ Drain Trap and Evacuation Flange Use?  

The URL's you posted for for the same item so I'm assuming you meant to reference the Camco RV Drain Trap for 3/4" Diameter Drain Hose #CAM37262 and the Exterior Evacuation Drain Trap #37295195. Both of these drain traps are exactly the…

The Camco RV Drain Trap part #CAM37262 that you referenced attaches directly to the sink. If would replace any style of trap that you have installed currently. You could use a basket strainer with this as long as it would fit it's 1-3/4 inch…

When installing the #CAM37262 you need to unscrew the top half of the drain trap from the bottom half and screw it onto your 1-3/4" drain tightly and then you can attach the bottom portion back on to the top using two of the four mounting spots…

I believe we have what you're looking for. We have the P-Trap Fitting #LSB86XR, which will install under your sink, shower or tub and will fit onto 1-1/4" to 1-1/2" diameter pipes.

The iN-Command TPMS for RVs, Trailers, and Vehicles part #NCTP100 will still send alerts if running in the background. That said, you need to be careful not to close the app but so long as you don't you will be fine.

I contacted the vendor and verified that you do in fact need to use plumber's putty when installing the Sink Strainer w/ Push-In Basket for 2" Drain #37295325. The putty will go on the top side of the sink, in between the sink and strainer.…

Looking at your photo, it looks like the threaded piece of 4" pipe that comes with the LaSalle Bristol Utopia TurboVent RV Air part #3447425011AAVABS is either the same length or very close to what you have cemented with a solvent cement like…

The Camco RV Drain Trap #CAM37262 or #CAM37420 is designed to be used with a 1-1/2 inch - 11.5 threaded drain fitting. I recommend the Valterra Sink Drain with Strainer Basket #A01-2011VP or the LaSalle Bristol RV Drain with Strainer Basket - Metal -…

The Camco RV Drain Trap, part #CAM37262 is designed for 3/4 inch diameter drain hoses. The threaded inlet portion of the trap measures 1-3/4 inches at the threads as shown in the attached photo. If your drain hose is 3/4 inches in diameter I am sure…

The Valterra Sink Drain with Strainer Basket #A01-2011VP works with standard 2-1/8 inch diameter RV sink drain holes and fits 1-1/2 inch P-traps. It will not work with the Camco #CAM37262 but the Valtera drain does have an adapter with it that works…

The Camco RV Drain Trap part #CAM37262 is designed to screw onto the bottom of a sink and then ran outside the trailer with a drain hose similar to the Camco RV Drain Hose w/ Drain Trap and Evacuation Flange part #CAM37420. It is not really designed…

It is challenging to know for certain if the Camco RV Drain Trap for 3/4" Diameter Drain Hose, #CAM37262 will help in this situation. I do see it as a cost effective attempt. I think best long term would be to reroute the drain lines to more…