Width and Backspacing of Trailer Wheel in Tire and Wheel Combo # TZ69VR
Updated 05/04/2017 | Published 05/03/2017
Question:
I intend to use this wheel assembly on a radial stacker conveyor. The load ratings and size are exactly what I need. To finish my design I need the details of the rim, specifically the location of the mounting flange from one side. Is there any dimensional details of the rim?
asked by: Brian P
Helpful Expert Reply:
The wheel in tire and wheel combo # TA69VR has an overall width of approximately 8.31 inches. The mounting surface is 0.19 inches off center. So from the mounting surface to the inside edge of the wheel is approximately 3.685 inches and to the outside of the wheel it is approximately 4.065 inches. The tire will stick out beyond that another 1/2 inch or so on each side.
Product Page this Question was Asked From
Provider 215/75R17.5 Radial Tire w/ 17-1/2" Solid Center Wheel - Offset - 8 on 6-1/2 - LR H
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range H
- 215/75-17.5
- 17-1/2 Inch
- M - 81 mph
- 8 on 6-1/2 Inch
- Steel Wheels - Powder Coat
- Taskmaster
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Offset of a Trailer Wheel
- Q&A: Recommended 17-1/2" Rim for a Dexter 8,000 lbs Axle
- Q&A: US Made ST215/75R17.5 Trailer Tires Needed
- Q&A: Can 16 inch Trailer Wheel/Tire be Upgraded to 17.5 inch Diameter
- Q&A: Recommended 17.5" Tire/Wheel Combo to Upgrade form 16" Wheel Setup
- Q&A: Replacement RV Step Motor for Part Number 9551
- Q&A: Compatibility of 17.5 Rims and Tires To Replace 16 Inch Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 2 Steps for Hooking Up an External Propane Tank to Your RV
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)