What Are The Dimensions Of The Erickson Hide-A-Hook Anchor # EM09094
Updated 01/25/2011 | Published 01/23/2011
Question:
What are the dimensions of these tie downs?
asked by: Earl D
Expert Reply:
On the Erickson Hide-A-Hook Anchor, part # EM09094, the dimensions are as follows.
Looking at the front of the anchor the width of the anchor is 3-9/16 inches and the height is 2-1/8 inches. The depth or thickness of the anchor is 1/2 inch.
The measurement of the mounting holes from center to center going left to right is 2-3/8 inches. The measurement of the mounting holes from center to center, top to bottom is 5/8 inch.
With the folding T-hook extended out from the anchor the distance from the anchor to the inside edge of the hook is 3/4 inch.
See the picture of the anchor to the right for all of the dimensions.
Product Page this Question was Asked From
Erickson Hide-A-Hook Truck or Trailer Anchor (2 Pack) - 1,200 lbs
- Trailer Tie Down Anchors
- Cleats
- Universal
- Chrome-Plated Steel
- 1200 lbs
- Bolt-On
- Folding
- Surface Mount
- Erickson
more information >
Continue Researching
- Q&A: Anti-Rattle Device and Hitch Lock that Works with the PortablePET Twistep
- Q&A: Will the Stake Pocket Insert Part # A70432 Fit a 2014 Ford F-150
- Q&A: Can You Drill Into An Aluminum Trailer To Install The CargoSmart D-Rings
- Q&A: Flexiride 2000 vs Timbren 2000 vs Timbren 2000 HD Suspension for Off Road Trailer
- Q&A: Why Would Brake Controller Cause Vehicle Brake Lights to Periodically Come On
- Q&A: Troubleshooting Curt Triflex Brake Controller that Stopped Working with Brakes
- Q&A: Comparing The Timbren Axle-Less Trailer Suspension System To The FlexiRide Half Torsion Axle System
- Article: Printable Trailer Bolt Hole Pattern Template