Will Inno Wedge 660 Roof Cargo Box Fit a 2007 Honda CR-V without Hatch Interference

Published 01/11/2017

Question:

Hi All, I was wondering what the hatch clearance was in the Inno Wedge 660. All the other manufacturers like Thule and Yakima provide this but Inno doesnt. I am interested in putting the wedge on my 2007 Honda CRV with factory bars.

asked by: Ernest P

Expert Reply:

To determine if the Inno Wedge cargo box # INBRM660BK will fit your 2007 Honda CR-V with factory roof rack there is just one measurement needed. Measure from the center of the front crossbar straight back to the line where the roof and hatch meet. If that distance is greater than 49 inches then the box will fit without interference.

On some vehicles the crossbars can be moved so it is possible that you can move the bar forward to get the required amount of clearance. If you do that, make sure there is 24 to 39 inches of space from the center of the front bar to the center of the rear bar which is the mounting spread the box will fit.

expert reply by: Michael H