Will the Titan Disc Brake Kit # T4747200 Fit on a 2003 Triton Elite 18 Dual Axle Snowmobile Trailer
Published 11/24/2010 >
Products Featured in This Question
Question:
Will Titan disc brake kit Item Id: ST-TD4843200 fit on a 2003 Triton Elite 18 dual axle, dual disc surge brake system snowmobiling trailer? Does the kit have everything I need for both axles?
asked by: Steve O
Expert Reply:
The Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout for Tandem, 3,500-lb Axles, item # T4843200, is designed to replace the Surge brake coupler, all of the brake lines and fittings, the hub/rotors, and the brake calipers. Everything is included for both axles.
The only way to be sure this kit will work on your trailer is to check the wheel bearing and seal part numbers and match them to those included in the # T4747200 kit and to measure the tongue on the trailer to make sure the surge coupler will fit.
The Bearings in the # T4747200 kit are # L68149 inner and # L44649 outer. The grease seal is # RG06-050. The coupler is designed to fit on a 3 inch wide channel tongue and has bolt holes spaced 3 inches on center apart.
You must keep in mind that the above mentioned kit is designed for use with 3,500 lb. axles with 4 bolt brake flanges and 14 or 15 inch wheels with 5 on 4-1/2 inch bolt patterns.
If you needed a new line kit with the disc brake kit you could use the Titan Hydraulic Brake Lines and Fittings for Tandem-Axle and Torsion-Axle Trailers, item # T4830000.
I have posted some instructions and a video for you to review that may be of some help.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Brake Actuator for Global Direct GDC-80
- Q&A: Replacement for Global Direct GDC80 Brake Actuator
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Q&A: Recommended Replacement Actuator for a GDC 80 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: What is the Mounting Hole Spacing on Titan Zinc-Plated Brake Actuator T4747220
- Q&A: Fold-Away Coupler Hinge For 2x3 Trailer Tongue
- Q&A: Can You Convert 4 Way Plug To Work With Trailer Brakes?
- Article: How Long will the Axles Last on my Boat Trailer?
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: What Do I Need To Tow A Trailer?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Boat Trailer Jacks


